1. اسم الأداة
بالعربية: أسلوب التحليل الهرمي لاتخاذ القرار.
بالإنجليزية: Analytic Hierarchy Process — AHP.
طوّر هذا الأسلوب توماس إل. ساعتي— Thomas L. Saaty لدعم القرارات متعددة المعايير.
2. تعريف الأداة وفائدتها
التحليل الهرمي طريقة تنظّم القرار في مستويات: الهدف، والمعايير، والبدائل. وتعتمد على المقارنات الثنائية لاستخراج أوزان الأولوية، ثم تجميعها لترتيب البدائل، مع فحص اتساق الأحكام.
الفائدة العملية: توضيح أسباب تفضيل بديل على آخر، وإظهار أثر أهمية المعايير في النتيجة.
سؤال الأداة الأساسي:
«أي بديل يحقق هدفنا بصورة أفضل، وفق المعايير وأولوياتها؟»
3. متى تُستخدم، ولمن تناسب؟
من التطبيقات المقترحة:
- اختيار مورد أو نظام تقني.
- ترتيب أولويات المشاريع.
- مقارنة مواقع لإنشاء فرع.
- اختيار شريك أو مقدم خدمة.
- المفاضلة بين مبادرات التطوير.
- دعم قرار تتداخل فيه عوامل مالية وفنية وتشغيلية.
تناسب فرق الإدارة والمشتريات والمشاريع والتخطيط. ويُفضّل تحديد الشروط الإلزامية أولًا، واستبعاد البدائل التي لا تحققها قبل المقارنة.
4. خطوات التطبيق
أولًا: تحديد الهدف والبدائل
صِغ القرار بدقة، مثل: «اختيار المورد الأنسب لتنفيذ خدمة محددة».
ثانيًا: بناء الهيكل الهرمي
ضع الهدف في الأعلى، ثم المعايير، ثم البدائل. ويمكن إضافة معايير فرعية عند الحاجة.
مثال: الهدف اختيار مورد، والمعايير الجودة والتكلفة وسرعة التسليم، والبدائل ثلاثة موردين.
ثالثًا: إجراء المقارنات الثنائية
قارن كل معيار بآخر بالنسبة إلى الهدف، ثم قارن البدائل تحت كل معيار.
مثال: «بالنسبة إلى هذا القرار، ما أهمية الجودة مقارنة بالتكلفة؟»
| القيمة | دلالتها في مقياس ساعتي |
|---|
| 1 | أهمية متساوية |
| 3 | تفضيل متوسط |
| 5 | تفضيل قوي |
| 7 | تفضيل قوي جدًا |
| 9 | تفضيل بالغ |
| 2، 4، 6، 8 | قيم وسطية |
تُستخدم المقلوبات للتعبير عن الاتجاه المعاكس؛ فإذا كانت المقارنة 4، فالمقارنة العكسية تساوي ¼.
رابعًا: حساب الأوزان وفحص الاتساق
تُستخرج الأوزان من مصفوفات المقارنة، عادةً باستخدام المتجه الذاتي الرئيسي. ويُحسب معامل الاتساق CR؛ وتُستخدم قيمة تقارب 0.10 أو أقل كقاعدة شائعة لقبول الاتساق. وتحتاج الأحكام غير المتسقة إلى مراجعة مبرراتها.
خامسًا: تجميع الأولويات
أولوية البديل النهائية = مجموع: وزن كل معيار × أولوية البديل تحت ذلك المعيار
سادسًا: اختبار الحساسية
جرّب تغيير الأوزان ضمن حدود معقولة. إذا تغيّر الترتيب بسهولة، فراجع المعلومات والافتراضات قبل اعتماد القرار.
5. مثال عملي
مثال افتراضي: اختيار أحد ثلاثة موردين
حدّد الفريق ثلاثة معايير: الجودة، والتكلفة، وسرعة التسليم.
مقارنة أهمية المعايير
| المعيار | الجودة | التكلفة | سرعة التسليم |
|---|
| الجودة | 1 | 4 | 2 |
| التكلفة | ¼ | 1 | ½ |
| سرعة التسليم | ½ | 2 | 1 |
تعني الأحكام أن الجودة أهم من التكلفة بأربع درجات، وسرعة التسليم أهم من التكلفة بدرجتين، والجودة أهم من سرعة التسليم بدرجتين.
المصفوفة متسقة تمامًا، وأوزانها:
- الجودة: 57.14%
- التكلفة: 14.29%
- سرعة التسليم: 28.57%
مقارنة الموردين تحت كل معيار
نفترض أن المقارنات الثنائية المتسقة أعطت نسب الأولوية التالية:
- الجودة: أ : ب : ج = 4 : 2 : 1
- التكلفة: أ : ب : ج = 1 : 2 : 4
- سرعة التسليم: أ : ب : ج = 1 : 4 : 2
في معيار التكلفة، تعني الأولوية الأعلى أن العرض أكثر تفضيلًا من ناحية التكلفة.
| المورد | أولوية الجودة | أولوية التكلفة | أولوية السرعة | الأولوية النهائية |
|---|
| أ | 57.14% | 14.29% | 14.29% | 38.78% |
| ب | 28.57% | 28.57% | 57.14% | 36.73% |
| ج | 14.29% | 57.14% | 28.57% | 24.49% |
حُسبت النتائج باستخدام القيم الدقيقة قبل التقريب.
قراءة النتيجة: يتصدر المورد «أ» لأن الجودة تحمل الوزن الأكبر، لكنه يتقدم بفارق صغير على «ب».
إذا أصبحت الجودة وسرعة التسليم متساويتين في الأهمية، مع بقاء وزن التكلفة كما هو، يتصدر المورد «ب». لذلك يجب أن يعكس وزن المعايير أولويات القرار الفعلية.
الأرقام تعليمية، وليست تقييمًا لموردين حقيقيين.
6. نموذج تطبيقي مبسّط
| عنصر التحليل | ما الذي نوثّقه؟ |
|---|
| الهدف | القرار المطلوب |
| الشروط الإلزامية | متطلبات قبول البدائل |
| البدائل | الخيارات المؤهلة للمقارنة |
| المعايير | عوامل المفاضلة وتعريف كل منها |
| المقارنات الثنائية | الأحكام والأدلة التي تدعمها |
| أوزان المعايير | نتائج الحساب |
| اتساق المصفوفات | قيمة CR والمراجعات المطلوبة |
| ترتيب البدائل | الأولويات النهائية |
| اختبار الحساسية | أثر تغير الأوزان على الترتيب |
| القرار | الاختيار ومبرراته |
انتبه: انخفاض معامل عدم الاتساق يدل على ترابط الأحكام، ولا يثبت صحة البيانات أو حياد المشاركين. جودة القرار تعتمد أيضًا على اختيار المعايير والأدلة المستخدمة.
7. المصدر والمراجع
1. Tool name
Arabic: أسلوب التحليل الهرمي لاتخاذ القرار.
English: Analytic Hierarchy Process — AHP.
The method was developed by Thomas L. Saaty to support multi-criteria decisions.
2. What it is and why it helps
AHP organises a decision into levels: the goal, the criteria and the alternatives. It uses pairwise comparisons to derive priority weights, then combines them to rank the alternatives while checking the consistency of judgements.
Practical value: making clear why one alternative is preferred over another, and showing how the importance of each criterion affects the result.
The tool’s core question:
“Which alternative best achieves our goal, given the criteria and their priorities?”
3. When to use it and who it suits
Suggested applications:
- Choosing a supplier or technical system.
- Prioritising projects.
- Comparing locations for a new branch.
- Choosing a partner or service provider.
- Choosing between development initiatives.
- Supporting a decision that involves financial, technical and operational factors.
It suits management, procurement, project and planning teams. Mandatory conditions are best defined first, and alternatives that fail them excluded before comparison.
4. Application steps
1. Define the goal and alternatives: state the decision precisely, e.g. “Choose the most suitable supplier for a specific service”.
2. Build the hierarchy: put the goal at the top, then the criteria, then the alternatives. Sub-criteria can be added if needed. Example: the goal is choosing a supplier, the criteria are quality, cost and delivery speed, and the alternatives are three suppliers.
3. Make pairwise comparisons: compare each criterion with every other in relation to the goal, then compare the alternatives under each criterion. Example: “For this decision, how important is quality compared with cost?”
| Value | Meaning on Saaty’s scale |
|---|
| 1 | Equal importance |
| 3 | Moderate preference |
| 5 | Strong preference |
| 7 | Very strong preference |
| 9 | Extreme preference |
| 2, 4, 6, 8 | Intermediate values |
Reciprocals express the opposite direction: if a comparison is 4, the reverse comparison is ¼.
4. Calculate weights and check consistency: weights are derived from the comparison matrices, usually using the principal eigenvector. The consistency ratio CR is calculated; a value of about 0.10 or less is a common rule of thumb for acceptable consistency. Inconsistent judgements need their reasoning reviewed.
5. Combine priorities:
Final priority of an alternative = sum of (weight of each criterion × the alternative’s priority under that criterion)
6. Test sensitivity: try changing the weights within reasonable limits. If the ranking changes easily, review the information and assumptions before finalising the decision.
5. Practical example
Hypothetical example: choosing one of three suppliers
The team set three criteria: quality, cost and delivery speed.
Comparing the importance of the criteria
| Criterion | Quality | Cost | Delivery speed |
|---|
| Quality | 1 | 4 | 2 |
| Cost | ¼ | 1 | ½ |
| Delivery speed | ½ | 2 | 1 |
These judgements mean quality is four degrees more important than cost, delivery speed is two degrees more important than cost, and quality is two degrees more important than delivery speed.
The matrix is perfectly consistent, and its weights are:
- Quality: 57.14%
- Cost: 14.29%
- Delivery speed: 28.57%
Comparing suppliers under each criterion
Assume the consistent pairwise comparisons produced these priority ratios:
- Quality: A : B : C = 4 : 2 : 1
- Cost: A : B : C = 1 : 2 : 4
- Delivery speed: A : B : C = 1 : 4 : 2
For cost, a higher priority means the offer is more favourable in cost terms.
| Supplier | Quality priority | Cost priority | Speed priority | Final priority |
|---|
| A | 57.14% | 14.29% | 14.29% | 38.78% |
| B | 28.57% | 28.57% | 57.14% | 36.73% |
| C | 14.29% | 57.14% | 28.57% | 24.49% |
Results were calculated using exact values before rounding.
Reading the result: Supplier A comes first because quality carries the most weight, but it leads B by only a small margin.
If quality and delivery speed became equally important, with cost’s weight unchanged, Supplier B would come first. The criteria weights must therefore reflect the decision’s real priorities.
The figures are for teaching purposes and are not an assessment of real suppliers.
6. Simplified working template
| Analysis item | What we document |
|---|
| Goal | The decision required |
| Mandatory conditions | Requirements for an alternative to be accepted |
| Alternatives | Options qualified for comparison |
| Criteria | Decision factors and the definition of each |
| Pairwise comparisons | Judgements and the evidence supporting them |
| Criteria weights | Calculation results |
| Matrix consistency | CR value and any reviews needed |
| Ranking of alternatives | Final priorities |
| Sensitivity test | Effect of changing weights on the ranking |
| Decision | The choice and its rationale |
Note: a low inconsistency ratio shows the judgements hang together; it does not prove the data is correct or that participants were impartial. Decision quality also depends on the choice of criteria and the evidence used.
7. Source and references